Bienvenido a FAAO Sanitary Ware Co., Ltd.
Teléfono: +86 13868315922 
Correo electrónico: [email protected]
Teléfono: +86 13868315922 Correo electrónico: [email protected] 
Teléfono: +86 13868315922 Correo electrónico: [email protected] 
Choosing between concealed shower set manufacturers in China is rarely a question of who quotes the lowest FOB price. For importers, distributors and hotel-project contractors, the real variables are rough-in compatibility, cartridge reliability, finish durability, and whether the factory can actually document the certifications your market requires. This guide compares ten China-based manufacturers that consistently appear on B2B shortlists for 2026. Every MOQ, lead time and certification range below is a typical figure — confirm it in writing before you release a deposit.
A juego de ducha oculto hides the mixing valve inside the wall. Only the trim plate, the lever and the shower outlets stay visible. That single design decision drives the whole commercial logic of the category.
On the upside, concealed sets carry a much higher perceived value than exposed mixers, they free up wall space in small bathrooms, and they let a distributor sell a coordinated look — overhead head, hand shower, trim plate and body jets from one SKU family. On the downside, the valve body is buried. If a cartridge fails, a body weeps, or the trim plate will not seat because the rough-in depth was set wrong, the remedy involves breaking tiles. Returns in this category are expensive, and they land on the distributor, not the factory.
That is why the three questions that matter most when you shortlist a manufacturer are not about price. They are: does the valve body match the wall constructions your installers actually work with; will the cartridge survive 500,000 cycles in hard water; and can the factory hand over certification numbers you can verify with the issuing body.
This is an editorial shortlist, not a paid ranking. Inclusion was based on five weighted criteria:
MOQs, lead times and certification scopes below are typical ranges drawn from public product data, B2B platform profiles and buyer reports as of 2026. They are not contractual terms, and they move with brass prices, finish choice and order volume.
Need a shortlist matched to your wall constructions and market?
Send FAAO your destination market, the wall type your installers typically work with, your annual volume and the price band you want to hit. We will come back with three suitable concealed bodies and an indicative FOB range.
| Fabricante | Best for | Certificaciones | Typical MOQ | Typical lead time |
|---|---|---|---|---|
| 1. FAAO Sanitary Ware (Wenzhou) | OEM/ODM programmes with mixed-SKU containers | CE, ACS, WaterMark (model dependent), ISO 9001 | 200 sets per model; negotiable on mixed containers | 30–45 days repeat; 45–60 days custom finish |
| 2. Luxuryhome (Jiangmen / Wenzhou) | Low MOQ sampling and broad certification coverage | cUPC/UPC, NSF, WaterSense, WaterMark, WRAS, ACS, DVGW, TMV2, SINTEF (selected models) | 50 sets per SKU; 100 sets for custom finishes | 35–40 days; samples around 7 days |
| 3. Jiangmen Moon Shower | Stainless steel concealed bodies at scale | ISO 9001, ACS, CE | Project based; high-volume orientation | 30–45 days |
| 4. Wenzhou Zhongsheng Sanitary Ware | Fast response and flexible entry MOQs | CE (scope varies by model) | Negotiable from small trial quantities | 25–40 days |
| 5. BOYU (China) | All-copper built-in systems with published test data | NSF, CE; 200-hour NSS | 100 sets standard finish; 500 custom; 1,000 full custom | 25–40 days (20ft); 30–50 days (40HQ) |
| 6. Aquacubic (Heshan / Shanghai) | Thermostatic concealed sets for North America | cUPC, CE, ACS (model dependent) | 50–100 sets per SKU | 30–45 days |
| 7. KaTianlong / Taizhou Weiye | Long-running shower specialist with own R&D | CE, ACS, ISO 9001 | 20–100 sets per SKU | Around 30 days |
| 8. Guangzhou Qishi / Knights (Jiangmen) | SUS304 thermostatic sets supplied with rough-in box | CE; 40 mm Wanhai cUPC ceramic valve | 100 sets | Around 30 days |
| 9. Heshan Empolo Sanitary Ware | Project supply with strong platform delivery metrics | Model dependent; confirm per SKU | Project based | 35–50 days |
| 10. Shaoxing Aolan Sanitary Ware | Entry-level brass concealed mixers, fast sampling | CE, ISO 9001; 35 mm ceramic cartridge | 200 sets | 3–7 days samples; 20–45 days production |
Each entry below follows the same structure: who they are, what they are best for, and the typical certification, MOQ and lead-time band you should expect when you ask for a quote.
Lo mejor para: OEM/ODM programmes and mixed-SKU containers for distributors and hotel projects.
FAAO was founded in 2001 and runs an integrated production chain covering foundry, machining, polishing and assembly. For concealed shower sets, the catalogue is built around brass valve bodies with ceramic cartridges — for example the FA-29621 wall-mounted concealed shower set, which pairs a brass body and zinc handle with a 30 mm ceramic cartridge and ships in chrome, matte black, gold and gunmetal. Typical published MOQ is 200 sets per model, with mixed-SKU containers negotiable for distributors building out a full range.
| Typical certifications | CE, ACS, WaterMark (license scope dependent on model), ISO 9001 |
| Typical MOQ | 200 sets per model; negotiable on mixed-SKU containers |
| Typical lead time | 30–45 days for repeat orders; 45–60 days for new tooling or custom finishes |
Want FAAO concealed bodies in your own brand?
Browse the current concealed shower set range — one-, two- and three-function bodies in chrome, matte black, gunmetal and brushed gold, with private-label cartons and laser logo options.
Lo mejor para: Buyers who want to test a market with a small first order before committing to a container.
Luxuryhome manages brass forming, CNC machining, polishing, assembly, testing and packing at its Jiangmen facility, with electroplating and PVD handled by approved partners and finished lots returned for sampled verification. The published standard MOQ is 50 sets per SKU, rising to 100 sets for custom finishes, which is among the lowest entry points in this list. Standard-product samples take about seven days; production runs 35–40 days after specification sign-off.
| Typical certifications | cUPC/UPC, NSF, WaterSense, WaterMark, WRAS, ACS, DVGW, TMV2, SINTEF on selected models |
| Typical MOQ | 50 sets per SKU; 100 sets for custom finishes |
| Typical lead time | 35–40 days production; about 7 days for standard samples |
Lo mejor para: Stainless-steel concealed bodies where corrosion resistance and weight matter more than unit cost.
Established in the mid-2000s, Moon Shower employs around 160 people and runs automated stainless-steel stamping, punching, welding, machining, polishing and assembly in-house. Stated annual capacity is roughly 600,000 stainless shower sets. The product range covers concealed shower mixers, shower columns, slide rails and shower arms, and the company mainly serves international bathroom brands rather than selling under its own label — worth knowing if you need a clean private-label route.
| Typical certifications | ISO 9001, ACS, CE |
| Typical MOQ | Project based; geared to high-volume programmes |
| Typical lead time | 30–45 days |
Lo mejor para: Distributors who need a responsive supplier and are still testing volume.
Zhongsheng appears consistently in B2B platform rankings for concealed shower sets, with a published on-time delivery rate above 97% and an average response time under one hour — both useful signals when you are running a tender across several factories at once. Independent of platform data, apply the same diligence as anywhere else: ask for the factory address, the certificate numbers and two references in your own market.
| Typical certifications | CE; scope varies by model — request certificate numbers |
| Typical MOQ | Negotiable from small trial quantities |
| Typical lead time | 25–40 days depending on season |
Lo mejor para: Buyers who want published test data up front.
BOYU publishes more engineering detail than most suppliers in this bracket: brass concealed valve bodies with ceramic-disc cartridges tested past 500,000 open/close cycles, 304 stainless overhead heads and hoses, and a 200-hour neutral salt-spray test result. Their published MOQ ladder is unusually transparent — 100 sets for standard chrome, black or gunmetal, 500 sets for custom finishes and 1,000 sets for full structural customisation — and mixed orders are allowed to reach the threshold.
| Typical certifications | NSF, CE; 200-hour neutral salt spray |
| Typical MOQ | 100 / 500 / 1,000 sets depending on customisation depth |
| Typical lead time | 25–40 days for a 20ft container; 30–50 days for 40HQ |
Lo mejor para: North American distributors who need cUPC-listed thermostatic sets.
Aquacubic runs separate brass and aluminium production and is a frequent name on North American distributor shortlists because its thermostatic shower products carry cUPC listing and it supports OEM packaging at competitive price points. Their concealed and shower-column ranges overlap, so confirm which line the quote refers to — certification scope is model-specific.
| Typical certifications | cUPC, CE, ACS (model dependent) |
| Typical MOQ | 50–100 sets per SKU |
| Typical lead time | 30–45 days |
Lo mejor para: Buyers who want an established specialist with in-house R&D.
Founded in 1997 and based in the Binhai Industrial Area of Taizhou, KaTianlong is one of the older dedicated shower factories in China, exporting to Europe, North America and the Middle East. They run their own R&D and offer OEM/ODM under the KATIANLONG brand, which matters when you want a modified trim plate or a non-standard outlet configuration rather than a straight catalogue buy.
| Typical certifications | CE, ACS, ISO 9001 (per public profile) |
| Typical MOQ | 20–100 sets per SKU |
| Typical lead time | Around 30 days |
Lo mejor para: Projects that want the rough-in box included in the set.
Qishi operates a 50,000 m² site in Jiangmen and focuses on 304 stainless-steel construction. Their thermostatic concealed sets are built on a cast 304 valve body without welding, supplied with an ABS embedded rough-in box, and use a 40 mm Wanhai cUPC-certified ceramic valve. Published test parameters are 1.6 MPa water pressure and 0.6 MPa air pressure, with a five-year guarantee — useful numbers to put next to your own acceptance criteria.
| Typical certifications | CE; 40 mm Wanhai cUPC ceramic valve |
| Typical MOQ | 100 sets |
| Typical lead time | Around 30 days after deposit |
Lo mejor para: Project supply where delivery reliability is the deciding factor.
Empolo runs a 13,000 m² facility with more than 120 staff and is one of the stronger performers on third-party platform metrics for this category — a 100% on-time delivery record and a 33% reorder rate in published supplier data. Reorder rate is the more telling number: buyers do not come back to a concealed-body supplier whose valve bodies leak. Certification scope needs confirming model by model.
| Typical certifications | Model dependent — request per-SKU documentation |
| Typical MOQ | Project based |
| Typical lead time | 35–50 days |
Lo mejor para: Price-sensitive programmes that still need a brass body and a documented cartridge.
Aolan builds brass-body concealed shower faucets around a 35 mm ceramic cartridge rated to 500,000 cycles without leakage, with CE and ISO 9001 on file and laser-logo, OEM and ODM support. Sampling is fast — three to seven days — which makes them a practical second source for benchmarking a quote you already hold.
| Typical certifications | CE, ISO 9001; 35 mm ceramic cartridge |
| Typical MOQ | 200 sets |
| Typical lead time | 3–7 days for samples; 20–45 days for production |
Most disputes in this category come from a specification gap, not from a defective product. Get these five numbers into your RFQ and half the risk disappears.
If you are still weighing whether a buried body is right for your project at all, our breakdown of concealed shower sets versus exposed shower faucets covers the trade-off in cost, maintenance access and installation risk.
Two-function sets — overhead rain head plus hand shower on a sequential diverter — remain the volume driver in both hospitality and mid-to-premium residential. They are cheaper than three-function sets, simpler to certify, and the diverter failure mode is well understood by installers. Three-function sets with body jets look impressive in a showroom but need a supply that can actually deliver; in low-pressure buildings they generate the complaints.
On finish, matte black has moved from a niche into a default for design-led projects, but it is the finish most likely to generate a warranty claim if it is painted rather than PVD. If you are building a black programme, confirm the process and the salt-spray hours, and order a physical finish sample before the production slot. FAAO’s black concealed shower set line is a useful reference point for what a PVD black should look and feel like against a chrome equivalent.
Ready to price a concealed shower programme?
FAAO supplies brass concealed shower sets in one-, two- and three-function configurations, with thermostatic or ceramic cartridges, PVD finishes and mixed-SKU containers. CE, ACS and WaterMark documentation available by model.
A concealed shower set buries the mixing valve body inside the wall, leaving only the trim plate, lever and outlets visible. An exposed system mounts the whole mixer on the wall surface. Concealed sets look cleaner and free up space, but they must be installed before tiling, and any future repair that needs access to the body means opening the wall. Exposed systems cost less to install and are far easier to service, which is why they remain common in budget and high-turnover properties.
For standard chrome finishes, published MOQs typically run from 50 to 200 sets per SKU, with several factories willing to mix three to five SKUs in one container to reach the threshold. Custom PVD finishes generally push the MOQ to 100–300 sets per SKU, and full structural customisation with your own tooling starts around 1,000 sets. If a supplier quotes a dramatically lower MOQ than everyone else, check whether the valve body is a stock item and what you are actually getting.
EU: CE marking plus ACS for drinking-water contact, with EN 1111 for thermostatic valves and EN 817 for mechanical mixers. UK: add WRAS approval and, for many projects, TMV2 or TMV3. North America: cUPC or UPC listing through IAPMO, NSF/ANSI 61 and 372 for low lead, and ASSE 1016 for pressure-balance valves. Australia and New Zealand: WaterMark to AS 4032 plus WELS registration, and WMTS assessment for thermostatic models. Always verify the certificate number with the issuing body rather than trusting a mark printed on the carton.
Most brass concealed bodies are designed for 60–90 mm from the finished wall surface to the valve face, while some European trim plates need a recess of 80–100 mm. Retrofit bodies often sit at 70–100 mm. The only reliable figure is the marking cast on the specific body you are installing — set it outside that range and the trim plate will not seat flush, and the fix involves removing tiles. Plan the depth from the finished surface, not from the blockwork, and pressure-test at 1.5 times working pressure for at least 30 minutes before closing the wall.
Ask for four things: the actual production address rather than a sales office, certificate numbers you can check with the issuing body, the salt-spray and cycle-test reports for the specific model, and two reference customers in your target market. Then request a live video walk-through of the machining and assembly line, and pay against a third-party inspection on the first container. For a full walkthrough of the process, see our B2B factory audit checklist for bathroom faucet suppliers in China.
Disclaimer: FAAO is included in this editorial shortlist because of our own factory presence and OEM/ODM capability. All MOQs, lead times, certifications and platform metrics shown are typical ranges drawn from public product data, B2B platform profiles and buyer reports as of 2026; they are not contractual terms. Confirm specific terms, certificate numbers and test reports with each manufacturer before issuing a purchase order.
A shortlist of ten concealed shower set manufacturers only narrows the field. The partner you choose still depends on your market’s certification requirements, the wall constructions your installers actually encounter, and whether the factory will share test reports and live production footage before your first deposit. Run two or three real quotes through the configurator above, pressure-test the samples you receive, and commission a third-party inspection on your first container. If you want a written FOB quote from FAAO with CE, ACS and WaterMark documentation, our team replies within one working day.
Optimized by Seraphinite Accelerator
Spanish 
English 
French 
Russian 
Portuguese