Добро пожаловать в компанию FAAO Sanitary Ware Co., Ltd.
Тел: +86 13868315922 
Электронная почта: экспорт[email protected]
Тел: +86 13868315922 Электронная почта: экспорт[email protected] 
Тел: +86 13868315922 Электронная почта: экспорт[email protected] 
When a B2B buyer specs kitchen faucets for apartments, hotels or commercial developments, the mounting style is often treated as a design detail. In reality, it changes the installation budget, plumbing layout and long-term maintenance risk. This guide compares deck-mounted and wall-mounted kitchen faucet installation costs so procurement teams, contractors and project managers can choose the right option before the sink goes in, avoid expensive retrofits, plan labour allowances accurately and keep the project margin intact from rough-in through to final handover.
Get a tailored kitchen faucet quote for your project
FAAO supplies deck-mounted, wall-mounted and commercial kitchen faucets in brass and stainless steel. Tell us your quantities, finish and certification needs.
A deck-mounted kitchen faucet sits on the countertop or sink rim. The water connections rise through the deck or sink holes, usually with one, two or three mounting points. This is the default choice for most residential and commercial kitchens because the sink and faucet form one unit.
A wall-mounted kitchen faucet installs on the wall or splashback behind the sink. The supply lines run inside the wall cavity and terminate at a concealed or exposed mixer. Wall-mounted taps create a cleaner deck line but need more planning during rough-in.
Both styles are widely available in FAAO’s kitchen faucet range, including deck-mounted kitchen sink faucets и wall-mounted kitchen faucets.
Deck-mounted faucets are usually cheaper to install because the plumbing is already exposed at the sink deck level. Most installers can complete the job without opening the wall.
| Cost Item | Typical Range | Примечания |
|---|---|---|
| Standard single-hole faucet | $35–$90 | Fits pre-drilled sinks; minimal labour. |
| Labour | $50–$150 | 1–2 hours for a straight replacement. |
| Deck plate or escutcheon | $10–$40 | Covers unused holes on a 3-hole sink. |
| Supply lines and fittings | $15–$35 | Braided stainless steel lines are standard. |
Total installed cost for a deck-mounted kitchen faucet typically falls between $100 and $315 per point, assuming the sink is already in place and the holes line up.
Wall-mounted faucets look minimalist, but the hidden plumbing pushes up both labour and material costs. The wall must be opened, the pipes secured and the finish made good before the tap goes on.
| Cost Item | Typical Range | Примечания |
|---|---|---|
| Wall-mounted faucet body | $60–$180 | Longer spout and wall flange add cost. |
| Labour | $150–$400 | Includes wall opening, pipework and tiling repair. |
| In-wall rough-in valve | $40–$120 | Required for concealed installations. |
| Tiling and finish repair | $50–$200 | Varies with splashback material and access. |
Total installed cost for a wall-mounted kitchen faucet usually ranges from $300 to $900 per point in new construction, and can exceed $1,000 per point in retrofit projects.
| Фактор | Deck-Mounted | Настенный |
|---|---|---|
| Typical installed cost | $100–$315 | $300–$900+ |
| Labour intensity | Low to moderate | Moderate to high |
| Wall opening required | No | Да |
| Retrofit difficulty | Легкий | Hard |
| Maintenance access | Easy from below | Limited without wall access |
| Best project stage | New build or renovation | New build / planned rough-in |
Find the right mounting style for your project
Explore deck-mounted and wall-mounted kitchen faucets designed for multi-unit developments, hospitality and commercial kitchens.
Several project-level variables can move the price up or down regardless of which mount type you choose:
For budget-sensitive developments, deck-mounted kitchen faucets win on total installed cost. They reduce labour hours, avoid wall repair and simplify future maintenance. They are also easier to swap out if a tenant or owner wants an upgrade later.
Wall-mounted faucets make sense when the design brief calls for an open countertop, an undermount sink or a minimal splashback. In those cases, the higher installation cost is justified by the cleaner aesthetic and easier sink cleaning. The key is to make the decision at the rough-in stage, before tiles go up.
For high-traffic commercial kitchens, a commercial kitchen faucet with a deck-mounted pull-out or pre-rinse design is usually the safer specification because parts are easier to source and service.
Use the quick selectors below to see which mount type fits your project profile. This is not a quote, but it gives procurement teams a starting point for budgeting.
Yes, in most cases. Deck-mounted faucets connect at sink level, so labour is limited to fitting the faucet and supply lines. Wall-mounted faucets need wall opening, rough-in valves and finish repair, which typically doubles or triples the installed cost.
Usually no. Switching from deck to wall mounting requires new pipework in the wall, correct spout height alignment and splashback repair. It is best done during a full renovation or before the wall is finished.
The faucet body itself can last just as long if it uses brass construction and a ceramic cartridge. The difference is serviceability. Deck-mounted faucets are easier to access, while wall-mounted models may need a service hatch for valve maintenance.
Beyond the faucet price, add the rough-in valve, wall opening and repair, tiling or splashback rework, and possibly a service panel. On retrofit projects, these extras can exceed the cost of the faucet itself.
Deck-mounted commercial kitchen faucets are usually preferred because they are easier to install, service and replace. Wall-mounted styles work better in display kitchens or front-of-house areas where aesthetics are the priority.
Deck-mounted kitchen faucets generally cost less to install and maintain than wall-mounted alternatives, making them the practical default for most B2B projects. Wall-mounted faucets remain a strong choice when design and open bench space matter more than budget. Decide at the rough-in stage, match the faucet to the sink configuration, and confirm certification needs early to avoid surprises. For bulk pricing, custom finishes, sample approvals or project-specific deliveries, contact the FAAO team for a tailored quote that fits your specification and timeline.
Оптимизировано Серафинит - Акселератор
Russian 
English 
Spanish 
French 
Portuguese